BAL-29* eave & ridge roof infill strips

$7.49 AUD

Sale Sold out

Quantity

Ember attack simulation video

BAL-29* eaves & ridge roof infill strips

Made with our SE 444 rubber which is rated as non-combustible (AS 1530.2 & AS 1530.3)

Any profile can be manufactured so please contact us if the profile you require is not shown here.

Please note that if you live in an area where mice & other rodents are an issue we suggest you consider the BAL-FZ "fixed" profiles as they have an impenetrable metal barrier as part of their construction. These can be found in our BAL-FZ section.

BAL-29 Gap filler / Sealing strip

Made with our SE 444 rubber which is rated as non-combustible (AS 1530.2 & AS 1530.3)

Seals gaps under flashings or around windows where they meet cladding. They can be fitted on the vertical or under an overhanging surface (either the fascia or around a window frame) because of the self adhesive backing.

Can be used to fill any gaps behind barge boards at the edges of tiled or metal roofs

Can be used to seal the bottom of metal cladding where it sits on a concrete slab, or under roof domes, roof skylights or any vents.

Can be used as a fire resistant seal which accommodates expansion & contraction due to temperature variations or movement or to seal any gap.

Other Gap filler / sealing strip dimensions are available if required. Contact us for a quote

*Bal-29 eave filler infill strips have been tested to AS 1530.2 (flammability/ignitability) and AS 1530.3 (spread of flame and heat) and are deemed non-combustible so are able to be used in BAL-29 constructions. However, to meet the strict requirements of AS 3959:2018 which is the mandatory Australian Standard that specifies design and construction requirements for homes built in designated bushfire-prone zones, it must be installed as part of a compliant system.