How To Properly Seal Your Metal Cabin Using Sponge Rubber And Tape
Share
Do you want to add more storage space to your garden? Setting up a metal cabin or shed can be a great solution. The sheeting used for metal cabins is affordable and very durable compared to other building materials, making it a perfect solution for small-budget projects. Metal sheeting is also very flexible so you can easily create a cabin of any shape or size.
Although metal cabins are quite affordable, they do have some flaws. For example, it can be tough to properly seal the cabin so water, wind and dust won’t get into your little building. Another issue is insulation.
If you want to properly seal your cabin or want to insulate the building a little bit then it might be time to invest in some sponge rubber and tape. In this article, we will look at how to use these to seal your metal cabin.
Why Choose Sponge Rubber and Tape for Sealing Your Metal Cabin
Sponge rubber is a terrific material to select if you want to seal off gaps around doors, or windows. This type of metal is incredibly durable and will hold up for many years. Sponge rubber only needs to be lightly compressed to form a proper seal around doors and windows and these sheets or tapes are very easy to install or apply.
Sponge rubber sheets vary from just 2mm to 60mm thick which means you can find a perfect sized piece or sheet for every gap or opening.
Another great reason to choose sponge rubber is that it is UV-resistant and waterproof. Your seals won’t become brittle and worn down even if they are exposed to moisture or constant UV rays.
How to Seal Your Metal Cabin
You don’t have to dismantle your entire metal cabin to get the tape or foam inserted or installed. Sponge rubber is incredibly flexible and the tape is very easy to apply since they are self-adhesive.
Let’s take a look at the best steps for sealing your cabin.
To seal your cabin, you will first need to locate all of the gaps and openings that need to be covered up. A good way to do this is by turning on a light inside the cabin after dark. Now stand outside and mark any areas where you can see the light filtering through.
It is always best to choose a tape that is a little bit wider than the gaps you will be sealing so there will be lots of contact space for the adhesive to bond with the metal. Now measure the length of the areas you would like to cover up.
After measuring the length, you can cut the strips to size. This can be done with a simple pair of scissors.
The tape comes with an adhesive backing with some strips that need to be removed before it can be secured into place. Remember to compress the strips so they can properly stick to the metal. It can also be good to push the rubber tape in between gaps in areas where there might be openings between joints. These sheets are very compressible and will fill out any openings with ease or can be squeezed into small spaces without much force.
Sponge Rubber and Tape Available in Melbourne
Gardiner Australia is a leading manufacturer and supplier of sponge rubber and tape. With a locally based factory in Melbourne, you are not likely to find these products more affordably anywhere else.
If you are looking for quality sponge rubber sheeting or sponge rubber tape then we welcome you to reach out and contact our team. With our quality products, your metal cabin will be properly protected and insulated so it will stay in perfect shape for longer and so all of your belongings will be properly secured.